Other Countries:

DELTA COIL – DC

DELTA COIL is a stainless steel domestic water heater without peak load elements. The DC has a built-in smooth surface stainless steel coil, and is designed for use with an external heat source/boiler. It is factory fit ted with a 10 mm. sensor pocket to allow temperature control management for the external heat source.

DELTA COIL DC has been developed for the Canadian market with high grade material selection and intelli gent technical solutions exclusive to OSO.

DELTA series is an award-winning hot water cylinder recognised as the most efficient product available. Cylinders available from 150-300 L (30-75 gallons). DELTA series can save enough energy to pay for the entire cylinder over its lifetime. The cylinder comes with adjustable feet for unstable floors. Equipped with anode for enhanced corrosion protection.

ADVANTAGES

COMPONENTS

Weight 150 kg
Dimensions 3 cm
SpecificationsUNITSC 150 – 3 kW/1x230V+HX 0.8m²SC 200 – 3 kW/1x230V+HX 1.0m²SC 300 – 3 kW/1x230V+HX 1.1m²
Identification
Product no.OSO1 1 009 7221 1 009 7231 1 009 724
Product nameSC 150 - 3 kW/1x230V+HX 0.8m²SC 200 - 3 kW/1x230V+HX 1.0m²SC 300 - 3 kW/1x230V+HX 1.1m²
UsageN/AN/AN/A
PlacementFloorFloorFloor
Dimensions
Diameter — ⌀mm570570570
Height - Hmm10101260 1710
Weightkg313951
PackagingmmN/AN/AN/A
Freight volumedm30.370.460.62
Technical/ErP information
CapacitypersonsN/AN/AN/A
Capacity 40°CL251355539
VolumeL (US-gallon)140190277
Heat-up time ΔT 65°ChoursN/AN/AN/A
Thermostat set point°C757575
Heat loss-EN 12897watt526484
AEC (energy consumption)kW/yearN/AN/AN/A
Energy efficiency%N/AN/AN/A
Tapping profile3XS–XXLN/AN/AN/A
Energy ratingA+–FBCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.