Other Countries:

OSO DELTA COIL DC

DELTA COIL is a stainless steel domestic water heater without peak load elements. The DC has a built-in smooth surface stainless steel coil, and is designed for use with an external heat source/boiler. It is factory fitted with a 10 mm. sensor pocket to allow temperature control management for the external heat source.

DELTA COIL DC has been developed for the Canadian market with high grade material selection and intelligent technical solutions exclusive to OSO.

DELTA series is an award-winning hot water cylinder recognised as the most efficient product available. Cylinders available from 150 – 300 L (30-75 gallons). DELTA series can save enough energy to pay for the entire cylinder over its lifetime. The cylinder comes with adjustable feet for unstable floors. Equipped with anode for enhanced corrosion protection.

ADVANTAGES

IMPORTANT EQUIPMENT 

Weight 200 kg
Dimensions 4 cm
SpecificationsUNITDC 200 — 3,0 kW / 1 × 230 V + HX 1,05 m²DC 300 — 2,8 kW / 1 × 230 V + HX 1,4 m²
Identification
Product no.OSO80003178000318
Product nameDC 200 — 2,8 kW / 1 × 230 V + HX 1,05 m²DC 300 — 2,8 kW / 1 × 230 V + HX 1,4 m²
UsageNot applicableNot applicable
PlacementFloorFloor
Dimensions
Diameter — ⌀mm595595
Height - Hmm12701750
Weightkg4758
Packagingmm595 × 595 × 1305 595 × 595 × 1765
Freight volumedm3462625
Technical/ErP information
Capacitypersons4.0 5.0
Capacity 40°CLNot applicable Not applicable
VolumeL (US-gallon)191284
Heat-up time ΔT 65°ChoursN/AN/A
Thermostat set point°C7070
Heat loss-EN 12897watt5749
AEC (energy consumption)kW/yearNot applicableNot applicable
Energy efficiency%Not applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicable
Energy ratingA+–FBB

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.

Documents