Other Countries:

OSO WALLY W

Wall-mounted water heater with all connections below

Water heater WALLY – W – has all pipe connections at the bottom and a slim diameter makes it especially suitable for hanging on the wall, although it is also possible to place it on the floor. Because the installation takes place under the water heater, WALLY can be placed close to the ceiling and save floor space. Increasing capacity can be done by raising the temperature in the water heater to 75 °C, using the externally adjustable thermostat. The temperature can be adjusted between 40-70 °C with the mixing valve.
The supplied safety valve is mounted on the cold water inlet.

The water heater WALLY has a stylish design in the family with the SAGA series, which hides all pipes and connections. The patented mixing function lowers the outgoing water temperature and reduces the risk of scalding. WALLY has the market’s lowest heat loss in its class, in combination with high storage temperature for unbeatable performance and more hot water.

WHY CHOOSE WALLY?

  • Save floor space with a slim diameter and all connections below
  • Save approx. 250 kWh / year in relation to good, insulated boilers (100 L)
  • Wall bracket included

Advantages

IMPORTANT EQUIPMENT

Weight 50 kg
Dimensions 1 cm
SpecificationsUNITW 120 – 2 kW / 1 × 230 VW 120 - 2 kW / 1 × 230 V + MIXW 30 – 2 kW / 1 × 230 VW 50 – 2 kW / 1 × 230 VW 50 - 2 kW / 1 × 230 V + MIXW 70 – 2 kW / 1 × 230 VW 70 - 2 kW / 1 × 230 V + MIXW 90 – 2 kW / 1 × 230 VW 90 - 2 kW / 1 × 230 V + MIX
Identification
Product no.OSO80620455 800045580620451 80620452 8000452 80620453800045380620454 8000454
Product nameW 120 – 2 kW / 1 × 230 VW 120 - 2 kW / 1 × 230 V + MIXW 30 – 2 kW / 1 × 230 VW 50 – 2 kW / 1 × 230 VW 50 - 2 kW / 1 × 230 V + MIX W 70 – 2 kW / 1 × 230 VW 70 - 2 kW / 1 × 230 V + MIXW 100 – 2 kW / 1 × 230 VW 90 - 2 kW / 1 × 230 V + MIX
UsageNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicable
PlacementFloorWallWallFloorWallWallWallWallWall
Dimensions
Diameter — ⌀mm430430430430430430430430430
Height - Hmm11500 1500500710 710 9209201180 1180
Weightkg383816202024243030
Packagingmm450 × 450 × 1560 450 × 450 × 1560450 × 450 × 580 450 × 450 × 790 450 × 450 × 790 450 × 450 × 980450 × 450 × 790450 × 450 × 1250 450 × 450 × 1250
Freight volumedm3316316117160160198198253253
Technical/ErP information
Capacitypersons2.5 2.51.0 1.51.52.02.02.0 2.0
Capacity 40°CL196Not applicable 5283Not applicable 108Not applicable143Not applicable
VolumeL (US-gallon)12112128454566669191
Heat-up time ΔT 65°Chours4,04,01,0 1,61,6 2,32,33,1 3,1
Thermostat set point°C656570707065656565
Heat loss-EN 12897watt535325323242424848
AEC (energy consumption)kW/yearNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicable
Energy efficiency%Not applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicable
Energy ratingA+–FCCCCCCCCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.